| 2019 | SCI, SCIE, SSCI, A&HCI
| Ivana Bošković, Mira Vukčević, Snežana Nenadović, Miljana Mirković, Marija Stojmenović, Vladimir Pavlović and Ljiljana Kljajević, | CHARACTERIZATION OF RED MUD/METAKAOLIN-BASED GEOPOLYMERS AS MODIFIED BY Ca(OH)2 | Materiali in Tehnologije/Materials and Technology |
| 2018 | SCI, SCIE, SSCI, A&HCI
| IvanaV. Bošković, Snežana S. Nenadović, Ljiljana M. Kljajević, Ivana S. Vukanac, Nadežda G.Stanković, Jelena M. Luković and Mira A. Vukčević | RADIOLOGICAL AND PHYSICOCHEMICAL PROPERTIES OF RED MUD BASED GEOPOLYMERS | Nuclear Technology&Radiation Protection, |
| 2015 | SCI, SCIE, SSCI, A&HCI
| I.Bošković,M.Vukčević, M.Krgović | Role of binder in the process of geopolymerization of red-mud based products | Journal of Environmental protection and Ecology |
| 2014 | SCI, SCIE, SSCI, A&HCI
| Vukčević Mira, Krgović Milun, Bošković Ivana, Ivanović Mileta, Zejak Radomir | The Influence of geopolimerization working conditions on the properties of geopolymers | Research Journal of Chemistry and Environment |
| 2013 | SCI, SCIE, SSCI, A&HCI
| Mira Vukčević, Danka Turović, Milun Krgović, Ivana Bošković, Mileta Ivanović, Radomir Zejak | Utilization of geopolimerization for obtaining construction materials based on red mud | Materials and Technology |
| 2013 | SCI, SCIE, SSCI, A&HCI
| Bošković Ivana, Vukčević Mira, Krgović Milun, Ivanović Mileta and Zejak Radomir | The influence of raw mixture and activators characteristics on red-mud based geopolymers | Research Journal of Chemistry and Environment |
| 2011 | SCI, SCIE, SSCI, A&HCI
| D.Smolović, M. Vukčević, D.Blečić | The influence of adding emulsion flocculants on the effects of red-mud sedimentation | Materials and Technology |
| 2011 | SCI, SCIE, SSCI, A&HCI
| Milun Krgović, Ivana Bošković , Mira Vukčević, Radomir Zejak, Miloš Knežević, Ratko Mitrović, Biljana Zlatičanin, Nataša Jaćimović | The influence of the mineral content clay from the white bauxite mine on the properties of the sintered product | Materiali in Tehnologije |
| 2009 | SCI, SCIE, SSCI, A&HCI
| Milun Krgović, Miloš Knežević, Mileta Ivanović, Ivana Bošković, Mira Vukčević,Radomir Zejak, Biljana Zlatičanin, Snežana Đurković | The properties of a sinteredproduct based on electrofilter ash | Materiali in Tehnologije |
| 2009 | SCI, SCIE, SSCI, A&HCI
| M. Vukčević, D.Blečić, Ž.Blečić, D.Čabarkapa | Introduction of the CP concept in a factory for the production of welding electrodes-Piva, Plužine | Chemical Industry and Chemical Industry Quarterly |
| 2003 | SCI, SCIE, SSCI, A&HCI
| Evangelista Enrico, Vukčević Mira, Bardi Franco, Spigareli S, Delijić Kemal | Analysis of the Hot Workability, Stress-Strain and Fracture Behavior of the AA2014 PM Aluminum Matrix Composite, | Trans Tech Publication Swiss, Materials Science Forum |
| 2003 | SCI, SCIE, SSCI, A&HCI
| M. Vukčević, S. Glišić, D. Uskoković | „Dynamic compaction of Al-Li-X powder obtained by REP“ | Material Science and Engineering |
| 2003 | SCI, SCIE, SSCI, A&HCI
| Evangelista Enrico, Vukčević Mira, Bardi Franco, Spigareli S, Delijić Kemal | Analysis of the Hot Workability, Stress-Strain and Fracture Behavior of the AA2014 PM Aluminum Matrix Composite | Trans Tech Publication Swiss, Materials Science Forum |
| 2002 | SCI, SCIE, SSCI, A&HCI
| M. Vukčević, Delijic Kemal | Some New Directions in Aluminum-based PM materials for Automotive applications | Materials and Technology |
| 2001 | SCI, SCIE, SSCI, A&HCI
| M. Vukčević, K. Delijić, D. Vuksanović | „Correlation of properties and type of filler in Al matrix composites fabricated by means of powder metallurgy“ | Materials and Technology |
| 2001 | SCI, SCIE, SSCI, A&HCI
| F. Bardi, M. Cabbibo, M. Vukčević, E. Evangelista, S. Spigarelli | „An analysis of hot deformation of an Al-Cu-Mg alloy produced by powder metallurgy“ | Mat-Sci and Engineering |
| 2001 | SCI, SCIE, SSCI, A&HCI
| Vukčević Mira, Delijić Kemal | The Correlation Between Properties and the Type of Reinforcement in Al Matrix Powder Metallurgy Composites | Materials and Technologies |
| 2001 | SCI, SCIE, SSCI, A&HCI
| N. Ignjatović, K. Delijić,Uskoković Dragan, M. Vukčević | „The designing of properties of calcium-hydroxyapatite/poly-l-lactide composite biomaterials by hot pressing“ | Z. Metallkunde, Discontinued in 2006, continued as International Journal of Materials Research |
| 2001 | SCI, SCIE, SSCI, A&HCI
| N. Ignjatović, M. Vukčević, K. Delijić, D. Uskoković | „Microstructure and Mechanical properties of Hot pressed hidroxyapatite/poly-l-lactide biomaterials“ | Key. Eng. Materials |
| 1995 | SCI, SCIE, SSCI, A&HCI
| M. Vukčević, S. Glišić, P. Živanović, D. Uskoković | „Shock compaction of AlMgSi0,5 spheres“ | Journal of Materials Science |
| 1994 | SCI, SCIE, SSCI, A&HCI
| D. Uskoković, M. Vukčević et al | „Shock compaction of aluminum alloys“ | Metal Powder Report |
| 1994 | SCI, SCIE, SSCI, A&HCI
| D. Uskoković, M. Vukčević, et al | „Target powder preparation“ | Metal Powder Report |
| 1993 | SCI, SCIE, SSCI, A&HCI
| M. Vukčević, S. Glišić, D. Uskoković | Dynamic compaction of Al-Li-X powder obtained by REP | Material Science and Engineering |
