| 2014 | SCI, SCIE, SSCI, A&HCI
| Delijić Kemal, Markoli Boštjan | The influence of the chemical composition and type of alloy on corrosion performances of some medium strength Al-Mg-Si series of alloys | Metallurgical and Materials Engineering Journal |
| 2014 | SCI, SCIE, SSCI, A&HCI
| Markoli Boštjan, Delijić Kemal, Štrekelj Neva, Naglič Iztok | Influence Of Cooling Rate And Alloying Elements On The Microstructure Of The Al-Mn-Based Alloy | Contemporary Materials Journal |
| 2014 | SCI, SCIE, SSCI, A&HCI
| Delijić Kemal, Markoli Boštjan, Naglič Iztok | The Influence of the Chemical Composition on the Corrosion Performances of Some Al-Fe-Si, Al-Mg-Si and Al-Mg-Mn Type of Alloys | Metallurgical and Materials Engineering Journal |
| 2013 | SCI, SCIE, SSCI, A&HCI
| Markoli Boštjan, Delijić Kemal, Štrekelj Neva, Naglič Iztok | Room Temperature Deformation Of In-Situ Grown Quasicrystals Embedded In Al-Based Cast Alloy | Metallurgical and Materials Engineering Journal |
| 2008 | SCI, SCIE, SSCI, A&HCI
| Asanovic V., Delijic K., Jaukovic N. | A study of transformation of beta-phase in Cu-Zn-Al shape memory alloys | Scripta Materialia |
| 2007 | SCI, SCIE, SSCI, A&HCI
| Asanović Vanja, Delijić Kemal | The Mechanical Behavior And Shape Memory Recovery Of Cu-Zn-Al Alloys, | Journal of Metallurgy |
| 2007 | SCI, SCIE, SSCI, A&HCI
| Delijic K., Asanovic V., Radonjić D. | The effect of the Thermo-mechanical processing on the properties of some Al-Fe-Si alloys with high Fe/Si ratio | Material Science Forum
|
| 2006 | SCI, SCIE, SSCI, A&HCI
| Delijić Kemal, Asanović Vanja, Radonjić Dragan | Mechanical behavior and corrosion properties of AA8079 sheets | Journal of the Mechanical Behavior of Materials, Freund Publishing House Ltd Israel |
| 2006 | SCI, SCIE, SSCI, A&HCI
| Delijić K., Asanović V., Radonjić D. | Downstream Processing of some Al-Fe-Mn-Si and Al-Fe-Si TRC Alloys and its Influence on Sheet/Foil Properties | Materials Science Forum: Recent Developments in Advanced Materials and Processes |
| 2006 | SCI, SCIE, SSCI, A&HCI
| Vanja Asanović, Kemal Delijić, Nada Jauković | Isothermal Decomposition of the β' phase in Cu-Zn-Al shape–memory alloys | Materials and Technology |
| 2006 | SCI, SCIE, SSCI, A&HCI
| Delijić Kemal, Asanović Vanja, Radonjić Dragan | Mechanical and Corrosion Properties of AA8011 Sheets and Foils | Materials and Technology |
| 2006 | SCI, SCIE, SSCI, A&HCI
| Asanović Vanja, Delijić Kemal | The Fabrication and Heat-treating of Cu-based Alloy for Shape Memory Plates | The International Journal for Manufacturing Science&Production, Freund Publishing House Ltd Israel |
| 2006 | SCI, SCIE, SSCI, A&HCI
| Delijić Kemal, Asanović Vanja, Radonjić Dragan | Mechanical Behavior and Corrosion Properties of Some AA6xxx Aluminum Alloys in T5 Temper | Chem. Ind & Chem Eng. Journal |
| 2005 | SCI, SCIE, SSCI, A&HCI
| Delijić Kemal, Asanović Vanja, Radonjić Dragan | The influence of the extrusion process and heat treatment on the properties of someAA6xxx extruded profiles | Materials and Technology |
| 2004 | SCI, SCIE, SSCI, A&HCI
| Asanović Vanja, Delijić Kemal, Leka Zorica | Aging effects in Cu-Zn-Al shape memory alloy | Materials science forum |
| 2004 | SCI, SCIE, SSCI, A&HCI
| Asanović Vanja, Delijić Kemal, Leka Zorica | The Effect of Heat Treatment on the Martensitic Transformation and Properties of Cu-Zn-Al alloys | Journal of the Mechanical Behavior of Materials, Freund publishing Ltd. Israel |
| 2003 | SCI, SCIE, SSCI, A&HCI
| Evangelista Enrico, Vukčević Mira, Bardi Franco, Spigareli S, Delijić Kemal | Analysis of the Hot Workability, Stress-Strain and Fracture Behavior of the AA2014 PM Aluminum Matrix Composite | Trans Tech Publication Swiss, Materials Science Forum |
| 2002 | SCI, SCIE, SSCI, A&HCI
| Asanović V., Delijić K., Radusinović I., Bošnjak B. | "The Effects of Thermomechanical Treatments on the Microstructure and Properties of Cu-Zn-Al Alloy" | High Temperature Materials and Processes |
| 2002 | SCI, SCIE, SSCI, A&HCI
| M. Vukčević, Delijic Kemal | Some New Directions in Aluminum-based PM materials for Automotive applications | Materials and Technology |
| 2002 | SCI, SCIE, SSCI, A&HCI
| Delijić Kemal | The Ductility and Corrosion Properties of Some AA5XXX Auto Body Sheets | Journal of Materials and Technologies |
| 2001 | SCI, SCIE, SSCI, A&HCI
| M. Vukčević, K. Delijić, D. Vuksanović | „Correlation of properties and type of filler in Al matrix composites fabricated by means of powder metallurgy“ | Materials and Technology |
| 2001 | SCI, SCIE, SSCI, A&HCI
| N. Ignjatović, K. Delijić,Uskoković Dragan, M. Vukčević | „The designing of properties of calcium-hydroxyapatite/poly-l-lactide composite biomaterials by hot pressing“ | Z. Metallkunde, Discontinued in 2006, continued as International Journal of Materials Research |
| 2001 | SCI, SCIE, SSCI, A&HCI
| N. Ignjatović, M. Vukčević, K. Delijić, D. Uskoković | „Microstructure and Mechanical properties of Hot pressed hidroxyapatite/poly-l-lactide biomaterials“ | Key. Eng. Materials |
| 2001 | SCI, SCIE, SSCI, A&HCI
| Vukčević Mira, Delijić Kemal | The Correlation Between Properties and the Type of Reinforcement in Al Matrix Powder Metallurgy Composites | Materials and Technologies |
| 2001 | SCI, SCIE, SSCI, A&HCI
| Delijić Kemal, Mišović Mitar | The influence of the surface roughness on the drawing parameters of Al-alloy auto body sheets | Materials and Technologies |
